You are here:

Aidomes.com - Domes from American Ingenuity, Inc.

Strength FAQ2 Print E-mail

answers to our

most frequently asked

strength questions


Q: When the reporter from Inside Edition visited, what dome advantage did they zero in on?
A:
The theme of the segment revolved around the super strength of A.I.'s domes and how they withstand hurricane forces. The reporter and two man camera crew first went to Miami, Florida and interviewed the owners of an American Ingenuity dome that survived a direct hit from hurricane Andrew. Views of the Menendezes' beautiful interior were shown but the inspiring stories of the horse trailer and tornado slamming the dome got edited.

They then drove up to our corporate offices. The segment went on to show our five dome complex including the attached screen some and component panels being made in the factory.

The next stop was to view our domes under construction in Melbourne, Florida, a 34' dome linked to a 22' garage. Also of interest was the interior metal framing and metal floor joists.

The program director had previously asked us for a way to illustrate the domes' ability to withstand hurricane force winds. Short of calling up a 200 mph wind and filming the real thing, the next best option is a computer finite analysis. The computer simulated a force equal to 230 mph winds. Our dome stood rock solid. In fact, to see the movement in the dome, the deflection had to be magnified 50 times. A square structure was also modeled but it collapsed with 150 mph winds.

A completed dome home was the next stop. After videoing the house and the dog dome, the reporter, Stephen Gendel, asked for an egg. While on screen he took his best shot at squeezing it to death. They departed shortly thereafter knowing that they had a good story and we can tell you with certainty, they were impressed.

About a week after the program aired we got a call from the New York office. They specifically called to tell us that they had received a flood of calls from people trying to get in touch with us. For viewers to call us directly they had to figure out the city and area code on their own. One lady reported that the long distance information operator knew our number by heart.

Click on Hurricane Recap to learn more.

Q: What wind, seismic, and snow loads will the dome withstand?
A:
Because the structure of American Ingenuity dome is steel reinforced concrete it is incredibly strong and easily enhanced to accommodate unusual requirements. The standard design will accommodate 250 mph. winds, 90 lb. snow loads and #9 earthquakes. If that is not enough, just tell us what you need.

Our dome design has proved itself by withstanding Hurricane Andrew's 200 mph winds, a tornado that rolled up a steel horse trailer and slammed it against the Menendez dome, four hurricanes in 2004, sub zero temperatures and heavy snow loads of the Northwest Territory of Canada, a 30" in diameter 115 foot tall hickory tree impact, a lighting strike and many other conditions since 1976.

More about steel horse trailer impact: American Ingenuity warranties their concrete domes against hurricanes, earthquakes and tornadoes. Since our dome kit manufacturing business started we have sold over 760 kits into 46 states and seven foreign areas. Since then American Ingenuity has not had any of our client's concrete domes have any damage due to hurricanes, earthquakes or tornadoes except for one dome during Hurricane Andrew. During Andrew a 45’ American Ingenuity Dome was impelled by a two wide steel horse trailer. A riser wall of the dome ended up with a hairline crack and a missing chunk of concrete. The dome owner caulked the crack and mixed up some fiber concrete and filled the chunk.

More about the tree impact: There was no damage to the Brack's 48' dome after winds in excess of 75 mph hit North Carolina in July of 1996. The real test came when a 115' high, 30" in diameter hickory tree was blown over and fell on their dome. The impact broke a 10" diameter branch. The tree slid off and landed on a deck post driving it and it's 16" square concrete footer 6" further into the ground. The insurance agent who inspected the damage to the deck conveyed his amazement about the dome's strength with this comment, "If that had been a frame house the tree would have ended up in the basement!"

More about the lightning strike: American Ingenuity's 45' office dome withstood another one of nature's most powerful forces, a LIGHTNING STRIKE. The lightning hit the outer edge of an entryway and the only damage it did to the dome was to knock off a handful of concrete at the point of impact! A couple of our computers have not been the same since, but the cost to repair the dome did not exceed $30 in materials and labor.

More about heavy snow loads: In 1995 Howard and Mary Carroll visited Robens Napolitan and Tom Kramer's dome in Idaho. Robens was enthusiastic, but Tom was not. He said "...its all HER idea, I didn't want a dome. Mary phoned them in 1996 after their basement was finished. Mary said you couldn't keep Tom quiet this time: he had nothing but wonderful things to say and had completely turned around.....ROOFS HAD COLLAPSED in their area under several feet of snow, but NOT HIS DOME! Tom's turnaround sold Mary and her husband on a dome and they bought a dome from us.

Q: Have you performed a load test on your panel?
A:
Yes, in October 2000 we performed a load test on one of our 48' dome building kit's component panels. The test was performed on our largest house panel using the standard 7" thick E.P.S. insulation, 3/4" thick concrete exterior reinforced with steel mesh and fiber reinforced plaster on the interior. The strength of the component panel can be best be determined by measuring the deflection of the panel as a load (weight) is applied in increments. The panel was placed horizontally. Its weight and the weight of everything placed on it was only supported along the outer edge of the panel. The loading of the panel was done by adding sand in 470 lb. increments. Plywood sides were attached to the panel edges so the sand could be spread evenly, providing a uniform load.

The deflection was measured in the center and six other locations. At all the measured points a steel ruler was attached to the panel extending high enough to be visible when the panel was fully loaded with the sand. A surveyor's transit allowed us to measure the deflection.

After 3,783 lbs. of sand was dumped on the panel its center had deflected less than 1/16 inch. Three days later the deflections had only increased to 3/32 inch. Our own amazement at the strength made us even more brave; so we cut through the interior plaster on the bottom of the panel. Even then the deflection was less than 3/16 inch.

We had not expected this exceptional strength. We could not mound the sand any higher so we set a pallet of 40 cement bags on top of the sand thinking, "This could do the panel in." That doubled the weight on the panel and the center deflection increased to less than 3/8 inch. The grand total deflection of less than 3/8 inch with almost four tons of weight was astonishing to us.

A 120-mph wind will exert a pressure of 30 lbs. per sq.ft. on a vertical wall and a snow load exceeding 50 lbs. per sq.ft. is rare. Our panel withstood 170 lbs. per sq.ft.  To read more click on Load Test

Q: The panel concrete is not that thick only 1/2" to 3/4", why is American Ingenuity's dome so strong?
A: The panel concrete does not need to be thick because the strength comes from the steel reinforced seams are filled with concrete. The seams between the triangular and riser panels are about 6" wide and 4" deep. The steel reinforced concreted seams act like steel beams. The steel mesh transfers any stress (tree impact, horse trailer impact) all over the dome instead of containing the stress in one spot. Another common thin shelled strong item is an egg.

Q: What are the skylights made of and will they break? Can they be replaced? How many can be installed in the dome shell?
A:
The skylight consists of two pieces of ¼” thick tempered glass (like car side window glass) about 46"h x 50" with ½” air space. Typical window glass is 1/8” thick and is not tempered. Tempering makes the glass stronger. We tested the skylight by dropping a four foot long 2x4 at varying heights to see when it would break. The 2x4 was dropped end wise from a ladder over the skylight. The exterior piece of glass broke at twelve feet.

We do not have shatterproof glass skylights. We have sold domes since 1976 and not had any skylights broken due to hurricanes, storms, tornadoes, hail, etc. If you want to protect the skylight you could install anchors around the skylight during the shell assembly and install louvers later. If for some reason the skylight needs to be replaced, you unscrew the stainless steel bolts and remove the flashing and weather stripping to remove the skylight. You can purchase a replacement skylight from us or you can have your local glass store repair or make another skylight for you.

Desiccant is installed between the two pieces of glass to keep “sweating” down. Gas between pieces of glass does not stop sweating. The skylight provides over eight square feet of glass. We put together the glass panels at our factory. A triangular hole is cast in the steel reinforced concrete component panel where the skylight sits on a ledge. Aluminum strips, stainless steel screws and black weather stripping are used to install the skylight.

Although our skylight is double paned glass when the outside temperature gets cold enough and the inside air contains enough moisture, it will sweat. This can be controlled by venting the moisture out of the top of the dome, circulating the air around the skylight (paddle fan) or providing a drip path. These things can practically eliminate the problem, but occasionally it still occurs. If you want more assurance, we would not recommend that you use the skylights.

The skylights are available in Clear or Reflective.

The Dome Shell could have 10 or 15 skylights, but we do not recommend that many. Three to five are quite sufficient. The dome shell R-value is around R-28. The skylights are a R-4 with ½” sealed airspace between the glass. Skylights should be kept to a minimum because they let cold or hot air into the dome.

 
Joomla SEO powered by JoomSEF

Main Menu

Aidomes Newsletter