To run presentation that goes through each room, first click on the arrow button to play then click on the Camera icon in the lower left and then click the start arrow to see presentation. (may take a few seconds to load) You can also see a list of rooms to zoom right in to. (There will be a glove that appears as a mouse pointer for moving around)
Another shoes icon on the lower left also enables you to move through rooms. (Use the glove that appears to drag the viewing angle around)\
Please note that the 3D software utilized to create these 3D Models does not show the first floor or second floor dome sloping walls. As a result first floor layouts show incorrect window and door sizes and some second floor 3D layouts do not match the furniture layouts in the actual second floor plan layouts. Beneath each 3D view is the floor plan layout with furniture with the second floor showing the perimeter five foot, six foot and seven foot height lines. You can print out the layout and cut out the to-scale ruler to measure the length and width of the rooms. We apologize for any inconvenience this may cause you.
The SECOND FLOOR CENTER HEIGHT slopes down to five feet on the perimeter.
Second floor center height:
27′ - nine feet one inch
30′ - eight feet four inches
34′ - nine feet nine inches
36′ - ten feet
To view 3D models for a few 15′, 18′ & 22′ stock plans, click on 3D.
To view 3D models for a few 40′, 45′ & 48′ stock plans, click on 3D.
To view two dimensional stock plan layouts for all the ten size dome kits, click on Stock Plans.