The American Ingenuity Dome and sound reduction from exterior hurricane wind sounds.
Even with large areas of walls full of glass,
outside noise stays outside due to aerodynamic dome shape.
How sound resistant is the American Ingenuity Concrete Dome? The dome exterior deflects noise easily. Due to the aerodynamic shape and seven inch thick EPS insulation, there is exterior noise reduction from coming into the dome. The only way Ai can describe the noise reduction in its dome is by an example. An Ai dome has Interstate 95 freeway in its back yard. I-95 traffic creates substantial noise. When in the dome you can barely hear the traffic. The sound like wind flows easily over the dome.
Before the interior walls and second floor are installed within the American Ingenuity Dome, sound will reflect back toward the center. After the second floor and the interior walls are installed, this characteristic is eliminated. Sounds inside the dome are absorbed by the rigid polystyrene insulation. To reduce sound from carrying from floor to floor, insulate the second floor interior walls and floor joists if needed with Suppress sound engineered drywall. (see below)
To reduce the sound of music from carrying from the basement up into the dome, you can install a sound proof basement ceiling or install a drop ceiling in the basement, etc. Whatever you could do in a conventional basement to stop sound from going up into a house, you can do in the dome.
During Hurricane Charley in 2004 one of American Ingenuity’s dome clients (who owns a 40’ and a 27’ dome in path of Charley) reported the following: “We were in the direct path of Hurricane Charley coming on land in Florida. We had winds greater than 145 mph and our dome had no problem….one window got a crack from debris…. most of Port Charlotte was destroyed and all three area hospital’s roofs were blown off. ‘It was like being in a silent movie because when I was in the dome looking out I could see debris blowing about but I could hardly hear anything.'”
During Hurricane Ike in 2008 another of Ai dome owners, Mr. & Mrs. Evans (who own a 48′ and a 34′ domes in Seabrook, Texas) experienced not being able to hear the hurricane winds also. Vickie stated, “Our domes had no damage although we had significant tree damage on our one acre lot. We slept through Hurricane Ike and only the next day realized how violent the hurricane had been. Whole communities two miles away in the Galveston Bay area were destroyed. Our neighbors could not believe that we slept through the storm….they told us that they had been up all night due to the violent winds and noise. We did not have to replace or repair our roof. YEA! Many of our neighbors have spent the last several months replacing their roofs. Because of the aerodynamic shape of the dome, its steel reinforced concrete construction and its thick insulation, the hurricane sounds were not absorbed through the walls of the dome and our domes had no damage. We are really glad that we built our domes back in 1991.”
Remodeling and Upgrades/Home Theater
Supress Sound-Engineered Drywall can be added directly to the existing standard drywall on one side or on both sides of the wall assembly and to the existing ceiling-no demolition needed! No need to remove even the paint from the walls. (Of course, the walls need to be in average or reasonable condition before starting.) An existing room in your home, office or even a whole structure, for example, being converted from apartments to condos, can be easily upgraded. Commercial operators can even Supress existing noisy hotel and motel room walls and ceilings with a single layer applied directly. A truly cost-effective choice for cost-conscious owners and operators.
New, sophisticated building codes require architects to create, and builders to produce, structures with exceptional strength and fire-resistance. Unfortunately, these very safe practices result in buildings that are also very efficient at transmitting unwanted noise and sound energy throughout, just like a network. Multi-family buildings are the most prone to these sound complaints due to the close proximity of neighbors, living adjacent, above and below.
Home theaters and living rooms with media centers are also great contributors to unwanted noise.
Building near a busy roadway or an airport? Supress has the answer: Use Supress, instead of regular drywall, in a single, easy-to-install layer on the interior surface of the wall facing the noise source. Want extra luxury performance? Use the next greater thickness of Supress.
Builders, contractors and their subcontractors like Supress Sound-Engineered Drywall because it installs and finishes just like regular drywall, allowing them to keep their labor costs in line in today’s competitive market. And because Supress installs and finishes just like regular drywall, crews do not need to have extensive supervision and training to fit and install Supress in a production environment on the job site. Crews can also use their same familiar tools, saving project time and money.
How to Order Supress Sound-Engineered Drywall
Supress™ Sound-Engineered Drywall in 4’ x 8’ panels:
• 1/2” SED1248-Remodel/Upgrade from Apartment to Condo specs
• 5/8” SED5848-New Construction/Remodel/Commercial Upgrade
• 3/4” SED3448-Home Theater/Conference Rooms/Medical Facility (HIPAA)/Music Rehearsal Areas
• 1 ” SED4448-Professional Recording Studio/Digital Theater/Concert Hall
Supress™ Sound-Engineered Drywall is also available in 4’ x 9’ , 4’ x 10’ and 4’ x 12’ panel sizes.
*Supress panels are factory-fabricated, composed of a proprietary core encased in heavy natural-finish face paper on each side. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. Long edges of panels are tapered, allowing joints to be reinforced and concealed with standard joint compound and tape.
How to Install Supress Sound-Engineered Drywall
Supress Sound-Engineered Drywall panels can be cut with a standard utility knife, eliminating the need for special tools, techniques and the installation headaches often associated with other acoustical panels. Supress can also be easily cut with standard commercial drywall routers and saws.
- Measure the space and cut the panel to size, minimizing the gaps between panels and with other surfaces. Due to the aggressive nature of air- and structure-borne sound, Supress recommends that any and every gap between the panels and any cut-outs or penetrations for electrical outlets, pipes, fire sprinkler nozzles, etc. be sealed with Supress Acoustical Sealant.
- After cutting, just place the Supress panel.
- After placing the panel in the correct position, use standard drywall screws, of the appropriate length for the material and job, to attach the panel.
It’s that easy.
Additional Supress Sound-Engineered Products:
- Supress Sound-Engineered™ Shear Panel
- Supress Sound-Engineered™ Subfloor
- Supress Sound-Engineered™ Underlayment
- Supress Sound-Engineered™ Channel
Miscellaneous Supress information:
- Use Supress Acoustical Sealant at panel edges and around any cut-outs for electrical boxes, pipes, sprinklers, etc.
- For commercial construction, Supress further enhances the acoustical performance of metal stud assemblies beyond those of traditional wood studs.
- Supress installs easily in standard wall assemblies both in renovation/remodels and in new construction.
- Only Supress provides STC 50 performance in a 1/2″ thick panel. For higher levels of performance, up to STC 75+, specify Supress in 5/8″, 3/4″ home theater or 1″ professional recording studio versions.
- One layer of Supress Sound-Engineered Drywall has the acoustical performance of up to 8 layers of standard drywall.
The Company, Quiet Solution, also manufactures Sound Proofing Solutions
The company, Quiet Solution, manufactures cost effective wall, ceiling, floor, and window soundproofing solutions. To learn more about their products go to their site www.quietsolutions.com Headquartered in Silicon Valley California, Quiet Solution develops and manufactures advanced materials for construction and other industries. Their patent-pending products perform better than old technologies, with less weight, less bulk, less material and labor cost. Quiet Solution sells its construction panels exclusively through authorized distributors.
Quiet Solution Introduces Quietrock 525 Soundproof Drywall with Score and Snap
- installs and finishes like standard drywall and requires no special tools or equipment.
- weighs about the same as standard drywall and provides superior sound isolation at a lower total installed cost than other methods.
- has STC values of up to 72, QuietRock 525 provides acoustic mitigation equivalent to eight layers of standard drywall, making it ideal for multifamily, home and commercial construction.
- The patent-pending CPG composite technology in QuietRock QR-525 uses advanced viscoelastic polymers, ceramics and gypsum (CPG) in a constrained three-layer fabrication.